|
|
|
| 》LGP Install the leading |
|
|
 |
| Lead the light plank light box needs to ask electrician to install, the installation steps is as follows: |
| 1、 |
Make sure a position for install of light, basis actual the circumstance and a species of lights make sure the gearing method; |
| 2、 |
| Measure to take measures:The actual size of the gearing bore position of a back of the basis light to fixed point of the certain gearing light box. Concrete cent following four kinds of circumstance: |
| A、 |
Can fix with the screw directly for wall for the aluminum plank wooden board sheet iron wait; |
| B、 |
General cement wall or the brick wall, use to pound at to drill to beat the bore first, then use to inflate the screw to fix; |
| C、 |
For the wall surface for ceramic tile, marble, glass...etc., can drill to wear the surface with the glass auger first, then drill to inflate the screw bore, then fix the light box; |
| D、 |
For the light box that the demand mourns to pack or hang, after choosing to like to install the position, press the light box install the bore of actual size to certain install the light box a little bit fixed, then install to like to hang, a line of link. |
|
| 3、 |
Connect the line:The exit of a power cable of light carries if( did not specify the outside) is all in the back, if the power supply that the light box go together with is in a back of light, can shear the plug of the power cable, connect the line directly, and deal with contact power supply with a tube of insulate appropriation to tie up fast;If the power supply go together with at install a position of light outside, can change the exit line of connect a power supply of light in an edge of light, then use three mutually the AC outlet that plug go together with when insert up; |
| 4、 |
Fix the light box:Turn on the upper cover of the light box, aim at to fix a gearing;( drill a hole in a base of light power cable position with the electric drill namely, re- pack the power cable, adjust with the spirit level the level appearance) |
| 5、 |
Switch on electricity to try bright, sweep a surface of light. |
| Warning:Lead an usage of the light plank electronics town flows the machine, the easy creation responds the electricity, install the attention connect goodly line! |
|
|
